A garage door seal is essential for keeping your garage warm in the winter and cool in the summer. Not to mention, it helps keep out the elements, like rain, snow, and dust. Over time, though, your garage door seal can wear down and need to be replaced.
Don’t worry, though! Replacing your garage door seal is a relatively easy DIY project that you can do in just a few hours. Plus, we’ll walk you through every step of the process so that you know exactly what to do. So, let’s get started!
Step One: Remove the Old Sealant
The first thing you need to do is remove the old sealant. To do this, we recommend using a putty knife or a caulk remover. Just run the tool along the old sealant until it starts to loosen, then pull it away from the surface. If you’re having trouble getting the old sealant off, you can also try heating it up with a hair dryer or a heat gun. Once it’s hot enough, it should come right off.
Step Two: Clean and Prep the Surface
Once you’ve removed all of the old sealant, you need to clean and prep the surface before applying the new sealant. To do this, just wipe down the surface with a damp cloth to remove any dirt or debris. Then, allow the area to dry completely before moving on to the next step.
Step Two: Clean and Prep the Surface
Once you’ve removed all of the old sealant, you need to clean and prep the surface before applying the new sealant. To do this, just wipe down the surface with a damp cloth to remove any dirt or debris. Then, allow the area to dry completely before moving on to the next step.
J&B Garage Door Installation Service
J&B Garage Door Repairs
Step Three: Apply the New Sealant
Now it’s time to apply the new sealant. First, apply painter’s tape along both sides of where you’ll be applying the new sealant. This will help create clean lines and prevent any accidental dripping. Then, cut off the tip of your caulk tube at a 45-degree angle and fit it with a caulk gun.
Start by running a bead of caulk along one side of your door frame. Then smooth it out with your finger or a putty knife before moving on to the other side. Once you’re done, remove any excess caulk with a damp cloth and allow it to dry for 24 hours before using your garage door again.
And that’s all there is to it! Replacing your garage door seal is easy enough for anyone to do—no matter their skill level—and only takes a few hours from start to finish. Plus, by doing it yourself, you can save money on costly repairs or replacements down the line!
However, going to a professional to get this kind of tasks done is always highly recommended. Not only do they offer great warranty, it’ll give you some peace of mind that the work has been done correctly. J & B Garage Door services in Edmonton, AB is a great place to start!
Need More help?
The GO TO to answer all general Garage Door related questions including prices!
General
Please contact us via by phone (+1 (780) 819-7679) or email us at [email protected]
We charge a flat fee of $29 per call.
There are two main reasons why people chose insulated garage doors. (In short, in Edmonton, YES, it’s a must.)
Firstly, they are durable, and lighter than wooden doors.
Secondly, they add to the energy efficiency of your home. Any air leakage in your home affects its overall energy efficiency.
An insulated door can help keep warmth inside the garage, which helps regulate the overall temperature control of the entire home.
There could be a number of causes for strange noises coming from your garage door. It could be something as simple as loose hardware or it could be an indication of a more serious problem. If you’re concerned, it’s always best to contact a professional for an inspection and diagnosis.
Installing a garage door is generally not recommended for DIYers as it can be quite complicated and dangerous. It’s best to leave this job to the professionals who have the experience and expertise to do it safely and correctly.
There are a few things you can do to make your garage door more secure. You can install additional locks or bolts on the door, use a security system, or install motion-activated lighting.
There are a few things you can do to make your garage door more secure. You can install additional locks or bolts on the door, use a security system, or install motion-activated lighting.
The average lifespan of a garage door is around 10-15 years. However, this will vary depending on the type of door and how well it’s been maintained.
The cost of a new garage door will vary depending on the size, style, and material. However, you can expect to spend anywhere from $500 to $5000 for a high-quality door.
Repairs & Maintenance
Some common problems that can occur with garage doors include misaligned or broken tracks, damaged panels, and faulty springs. If you notice any of these issues, it is best to call a professional for assistance.
There are several things you can do to help prevent your garage door from breaking, such as regularly servicing it and ensuring that all parts are in good working order. Additionally, you can install a backup power source in case of an outage.
If your garage door breaks, the first thing you should do is call a professional for assistance. Once they arrive, they will be able to assess the situation and determine the best course of action. In some cases, they may be able to repair the door on the spot. However, in other cases, it may be necessary to replace the entire door.
The cost of repairing a garage door will vary depending on the severity of the damage and the type of door. However, in most cases, it is best to call a professional for an estimate prior to having any work done.
One of the most common garage door repair issues is a faulty garage door cable. The cable is responsible for lifting the heavy door, so it takes a lot of wear and tear.
Over time, the cable can become frayed or even snap completely. If you notice that your garage door isn’t working as smoothly as it used to or that the cable appears to be damaged, it’s time to replace it.
Replacing a garage door cable is a fairly simple process, but it’s best to leave it to a professional.
The average cost to repair a garage door cable is $125.
However, the cost can range from $75 to $200, depending on the severity of the damage and the type of garage door.
For a complete replacement, the average cost is $300.
The cost of a garage door cable repair or replacement in Edmonton will vary depending on the size and type of garage door, as well as the availability of parts.
- They are squeaky & cause a lot of noise.
- If you notice that your springs are noisy, it may just be an annoyance. However, sometimes this noise can be a sign of a more serious problem.
- To ensure that your garage doors are in good working order, it is advisable to call for an assessment.
- The experts can apply lubricant, test your garage doors, and diagnose the real problem. If they find everything is A-okay, invest in some good garage door spring oil and apply every six months or so on the noisy springs.
- By taking these proactive steps, you can keep your garage doors in good working condition and help to prevent any potential problems down the road.
- Spring Tension Issues such as slowly closing door.
- Torsion springs are designed to counterbalance the weight of your door so that it can be opened and closed with ease.
- However, over time they will inevitably stretch and become less effective. This is usually due to normal wear and tear, but it can also be caused by extreme temperature changes.
- Thankfully, this is a fairly simple issue to fix, but we wouldn’t recommend trying to do it yourself. The springs are extremely tense, and attempting to repair them by yourself could be dangerous.
- We recommend calling your local garage door company so that they can safely make the necessary adjustments.
- Torsion Spring looks to be damage or broken.
- A garage door torsion spring is a key component of your garage door system, and it is usually the first part to fail. If the spring breaks, you will likely hear a loud noise, similar to a firecracker.
- If your garage door is having trouble staying open, or if it only opens a few inches and then stops, it is probably due to a broken spring.
- It is dangerous to try to open your garage door with a broken spring, so it is important to call for professional garage door spring repair as soon as possible.
- A qualified technician will be able to quickly diagnose the issue and make the necessary repairs.